iJIT_NotifyEvent

Reports information about JIT-compiled code to the agent.

Syntax

int iJIT_NotifyEvent( iJIT_JVM_EVENT event_type, void *EventSpecificData );

Description

The iJIT_NotifyEvent function sends a notification of event_type with the data pointed by EventSpecificData to the agent. The reported information is used to attribute samples obtained from any Intel® VTune™ Amplifier collector. This API needs to be called after JIT compilation and before the first entry into the JIT-compiled code.

Input Parameters

Parameter	Description
`iJIT_JVM_EVENT event_type`	Notification code sent to the agent. See a complete list of event types below.
`void *EventSpecificData`	Pointer to event specific data.

The following values are allowed for event_type:

`iJVM_EVENT_TYPE_METHOD_LOAD_FINISHED`	Send this notification after a JITted method has been loaded into memory, and possibly JIT compiled, but before the code is executed. Use the `iJIT_Method_Load` structure for `EventSpecificData`. The return value of `iJIT_NotifyEvent` is undefined.
`iJVM_EVENT_TYPE_SHUTDOWN`	Send this notification to terminate profiling. Use NULL for `EventSpecificData`. `iJIT_NotifyEvent` returns 1 on success.
`JVM_EVENT_TYPE_METHOD_UPDATE`	Send this notification to provide new content for a previously reported dynamic code. The previous content will be invalidated starting from the time of the notification. Use the `iJIT_Method_Load` structure for `EventSpecificData` with the following required fields: `method_id` to identify the code to update `method_load_address` to specify the start address within an identified code range where the update should be started `method_size` to specify the length of an updated code range
`JVM_EVENT_TYPE_METHOD_INLINE_LOAD_FINISHED`	Send this notification when an inline dynamic code is JIT compiled and loaded into memory by the JIT engine, but before the parent code region starts executing. Use the `iJIT_Method_Inline_Load` structure for `EventSpecificData`.
`iJVM_EVENT_TYPE_METHOD_LOAD_FINISHED_V2`	Send this notification when a dynamic code is JIT compiled and loaded into memory by the JIT engine, but before the code is executed. Use the `iJIT_Method_Load_V2` structure for `EventSpecificData`.

The following structures can be used for EventSpecificData:

iJIT_Method_Inline_Load Structure

When you use the iJIT_Method_Inline_Load structure to describe the JIT compiled method, use iJVM_EVENT_TYPE_METHOD_INLINE_LOAD_FINISHED as an event type to report it. The iJIT_Method_Inline_Load structure has the following fields:

Field

Description

unsigned int method_id

Unique method ID. Method ID cannot be smaller than 999. You must either use the API function iJIT_GetNewMethodID to get a valid and unique method ID, or else manage ID uniqueness and correct range by yourself.

unsigned int parent_method_id

Unique immediate parent’s method ID. Method ID may not be smaller than 999. You must either use the API function iJIT_GetNewMethodID to get a valid and unique method ID, or else manage ID uniqueness and correct range by yourself.

char *method_name

The name of the method, optionally prefixed with its class name and appended with its complete signature. This argument cannot be set to NULL.

void *method_load_address

The base address of the method code. Can be NULL if the method is not JITted.

unsigned int method_size

The virtual address on which the method is inlined. If NULL, then data provided with the event are not accepted.

unsigned int line_number_size

The number of entries in the line number table. 0 if none.

pLineNumberInfo line_number_table

Pointer to the line numbers info array. Can be NULL if line_number_size is 0. See LineNumberInfo structure for a description of a single entry in the line number info array.

char *class_file_name

Class name. Can be NULL.

char *source_file_name

Source file name. Can be NULL.

iJIT_Method_Load Structure

When you use the iJIT_Method_Load structure to describe the JIT compiled method, use iJVM_EVENT_TYPE_METHOD_LOAD_FINISHED as an event type to report it. The iJIT_Method_Load structure has the following fields:

Field

Description

unsigned int method_id

Unique method ID. Method ID cannot be smaller than 999. You must either use the API function iJIT_GetNewMethodID to get a valid and unique method ID, or else manage ID uniqueness and correct range by yourself.

char *method_name

The name of the method, optionally prefixed with its class name and appended with its complete signature. This argument cannot be set to NULL.

void *method_load_address

The base address of the method code. Can be NULL if the method is not JITted.

unsigned int method_size

The virtual address on which the method is inlined. If NULL, then data provided with the event are not accepted.

unsigned int line_number_size

The number of entries in the line number table. 0 if none.

pLineNumberInfo line_number_table

Pointer to the line numbers info array. Can be NULL if line_number_size is 0. See LineNumberInfo structure for a description of a single entry in the line number info array.

unsigned int class_id

This field is obsolete.

char *class_file_name

Class name. Can be NULL.

char *source_file_name

Source file name. Can be NULL.

void *user_data

This field is obsolete.

unsigned int user_data_size

This field is obsolete.

iJDEnvironmentType env

This field is obsolete.

iJIT_Method_Load_V2 Structure

When you use the iJIT_Method_Load_V2 structure to describe the JIT compiled method, use iJVM_EVENT_TYPE_METHOD_LOAD_FINISHED_V2 as an event type to report it. The iJIT_Method_Load_V2 structure has the following fields:

Field

Description

unsigned int method_id

Unique method ID. Method ID cannot be smaller than 999. You must either use the API function iJIT_GetNewMethodID to get a valid and unique method ID, or else manage ID uniqueness and correct range by yourself.

char *method_name

The name of the method, optionally prefixed with its class name and appended with its complete signature. This argument cannot be set to NULL.

void *method_load_address

The base address of the method code. Can be NULL if the method is not JITted.

unsigned int method_size

The virtual address on which the method is inlined. If NULL, then data provided with the event are not accepted.

unsigned int line_number_size

The number of entries in the line number table. 0 if none.

pLineNumberInfo line_number_table

Pointer to the line numbers info array. Can be NULL if line_number_size is 0. See LineNumberInfo structure for a description of a single entry in the line number info array.

char *class_file_name

Class name. Can be NULL.

char *source_file_name

Source file name. Can be NULL.

char *module_name

Module name. Can be NULL. The module name can be useful for distinguishing among different JIT engines. VTune Amplifier will display reported methods grouped by specific module.

LineNumberInfo Structure

Use the LineNumberInfo structure to describe a single entry in the line number information of a code region. A table of line number entries provides information about how the reported code region is mapped to source file. VTune Amplifier uses line number information to attribute the samples (virtual address) to a line number. It is acceptable to report different code addresses for the same source line:

Offset

Line Number

1

2

12

4

15

2

18

1

21

30

VTune Amplifier constructs the following table using the client data:

Code sub-range

Line Number

0-1

2

1-12

4

12-15

2

15-18

1

18-21

30

The LineNumberInfo structure has the following fields:

Field

Description

unsigned int Offset

Opcode byte offset from the beginning of the method.

unsigned int LineNumber

Matching source line number offset (from beginning of source file).

Field	Description
`unsigned int method_id`	Unique method ID. Method ID cannot be smaller than 999. You must either use the API function `iJIT_GetNewMethodID` to get a valid and unique method ID, or else manage ID uniqueness and correct range by yourself.
`unsigned int parent_method_id`	Unique immediate parent’s method ID. Method ID may not be smaller than 999. You must either use the API function iJIT_GetNewMethodID to get a valid and unique method ID, or else manage ID uniqueness and correct range by yourself.
`char *method_name`	The name of the method, optionally prefixed with its class name and appended with its complete signature. This argument cannot be set to NULL.
`void *method_load_address`	The base address of the method code. Can be NULL if the method is not JITted.
`unsigned int method_size`	The virtual address on which the method is inlined. If NULL, then data provided with the event are not accepted.
`unsigned int line_number_size`	The number of entries in the line number table. 0 if none.
`pLineNumberInfo line_number_table`	Pointer to the line numbers info array. Can be NULL if `line_number_size` is 0. See `LineNumberInfo` structure for a description of a single entry in the line number info array.
`char *class_file_name`	Class name. Can be NULL.
`char *source_file_name`	Source file name. Can be NULL.

Field	Description
`unsigned int method_id`	Unique method ID. Method ID cannot be smaller than 999. You must either use the API function `iJIT_GetNewMethodID` to get a valid and unique method ID, or else manage ID uniqueness and correct range by yourself.
`char *method_name`	The name of the method, optionally prefixed with its class name and appended with its complete signature. This argument cannot be set to NULL.
`void *method_load_address`	The base address of the method code. Can be NULL if the method is not JITted.
`unsigned int method_size`	The virtual address on which the method is inlined. If NULL, then data provided with the event are not accepted.
`unsigned int line_number_size`	The number of entries in the line number table. 0 if none.
`pLineNumberInfo line_number_table`	Pointer to the line numbers info array. Can be NULL if `line_number_size` is 0. See `LineNumberInfo` structure for a description of a single entry in the line number info array.
`unsigned int class_id`	This field is obsolete.
`char *class_file_name`	Class name. Can be NULL.
`char *source_file_name`	Source file name. Can be NULL.
`void *user_data`	This field is obsolete.
`unsigned int user_data_size`	This field is obsolete.
`iJDEnvironmentType env`	This field is obsolete.

Field	Description
`unsigned int method_id`	Unique method ID. Method ID cannot be smaller than 999. You must either use the API function `iJIT_GetNewMethodID` to get a valid and unique method ID, or else manage ID uniqueness and correct range by yourself.
`char *method_name`	The name of the method, optionally prefixed with its class name and appended with its complete signature. This argument cannot be set to NULL.
`void *method_load_address`	The base address of the method code. Can be NULL if the method is not JITted.
`unsigned int method_size`	The virtual address on which the method is inlined. If NULL, then data provided with the event are not accepted.
`unsigned int line_number_size`	The number of entries in the line number table. 0 if none.
`pLineNumberInfo line_number_table`	Pointer to the line numbers info array. Can be NULL if `line_number_size` is 0. See `LineNumberInfo` structure for a description of a single entry in the line number info array.
`char *class_file_name`	Class name. Can be NULL.
`char *source_file_name`	Source file name. Can be NULL.
`char *module_name`	Module name. Can be NULL. The module name can be useful for distinguishing among different JIT engines. VTune Amplifier will display reported methods grouped by specific module.

Field	Description
`unsigned int Offset`	Opcode byte offset from the beginning of the method.
`unsigned int LineNumber`	Matching source line number offset (from beginning of source file).

Return Values
The return values are dependent on the particular iJIT_JVM_EVENT.

Code sub-range	Line Number
0-1	2
1-12	4
12-15	2
15-18	1
18-21	30

iJIT_NotifyEvent

Syntax

Description

Input Parameters

Return Values

関連情報